Wrought Iron Atara Handrail on Two Concrete In Posts - 1m - 2.4m

These versatile handrails are an affordable DIY method of adding a handrail to your property. The handrail pivots on the two posts, this allows the handrail to be installed down a small flight of steps. The handrail is designed to sit at approx 90cm high, the ideal height for holding onto.

Available in a choice of finishes:

Bare Metal - supplied with no coatings applied, allowing you to add the finish of your choice and colour.

Black Zinc Primed - one coat of a zinc based paint is applied to help prevent rust, your rail will arrive black and will require a top coat and then the usual ongoing maintenance you traditionally associate with wrought iron.

Specification 

Finished Height: 900mm

Rail: 40mm x 12mm solid convex bar

Posts: 40mm x 40mm x 2mm box section, each post has an additional 500mm for concreting below the ground level

Distance from end of the rail to the centre of the lug: 220mm

Measuring

We recommend that you measure along the pitch line of your steps (or slope). Whilst everyone's property is different, in general we suggest that the top post be placed on the landing and the bottom post on the bottom post.

The distance from the post to the end of the rail is 20cm. 

Guarantee

All our products carry a two year guarantee against faulty workmanship. Unfortunately we cannot guarantee against rust as this is a natural effect on iron.